Browse all practice questions for the CCI Physics Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

2026 CCI Physics Practice Test – Your Complete Guide to Exam Success! course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which index assesses the potential for mechanical effects caused by ultrasound?
  • If the mass in a mass-spring system is doubled with the same spring constant, how does the angular frequency ω change?
  • In the Compton wavelength shift formula Δλ = (h/(m_e c)) (1 - cos θ), which constants appear in the prefactor?
  • In the context of ultrasound, what does ALARA stand for?
  • In an RLC circuit, the impedance is minimized when the inductive and capacitive reactances cancel. What condition achieves this?
  • Which artifact results in a duplicate image across a strong reflector?
  • What is the importance of the Doppler angle in Doppler ultrasound?
  • Which statement correctly describes buoyant force on a submerged object?
  • What does Heisenberg's uncertainty principle imply about measuring position and momentum simultaneously?
  • What causes strong reflection in ultrasound imaging?
  • Which index measures the likelihood of tissue heating during ultrasound procedures?
  • In incompressible fluid flow, the continuity equation A1 v1 = A2 v2 implies what about the speed when the cross-sectional area decreases?
  • What artifact can result in misplaced or duplicated structures in ultrasound imaging?
  • In an RLC alternating-current circuit, which expressions correctly define the inductive and capacitive reactances?
  • What is the artifact called that appears when the ultrasound beam encounters strong reflectors leading to multiple echoes?
  • What aspect of imaging does frequency affect in relation to axial resolution?
  • In a diffraction grating, for fixed λ and d, if m increases, what happens to θ?
  • What is one effect of sound bending at a boundary in ultrasound imaging?
  • What happens to image quality when using low frequency?
  • What effect does increasing the pulse repetition frequency (PRF) have on aliasing?
  • The capacitance of a parallel-plate capacitor with plate area A, separation d and vacuum between plates is?
  • The mass defect Δm is converted into binding energy via E = Δm c^2. What does this imply about the mass of a bound nucleus relative to the sum of its constituent nucleons?
  • Inserting a dielectric material with dielectric constant κ between the plates of a capacitor increases its capacitance by what factor (assuming vacuum capacitance C0)?
  • In a refracting telescope, the angular magnification is M = fo/fe. If fo = 200 cm and fe = 25 cm, what is the magnification?
  • Which characteristic is associated with high frequency wavelengths?
  • If plate area is doubled in a vacuum parallel-plate capacitor, what happens to the capacitance?
  • What is a benefit of short wavelength in imaging?
  • Length contraction is described by L = L0/γ. If a rod has proper length L0, what is its length L as observed by a moving observer?
  • In steady, incompressible flow, Bernoulli's equation relates pressure, velocity, and height along a streamline. What does it imply about a faster-moving region?
  • The first law of thermodynamics in the conventional sign convention for a closed system states ΔU = Q - W. What does each term represent?
  • What artifact is caused by weak attenuators in ultrasound imaging?
  • According to the BART rule, which color indicates flow moving away from the transducer?
  • Which artifact can cause misinterpretation of the ultrasound image due to strong reflections?
  • In radioactive decay, A = λ N. If the activity is halved after a time equal to the half-life t1/2, what is λ in terms of t1/2?
  • What is a common misconception about ultrasound image formation?
  • For a projectile launched from ground level, neglecting air resistance, what is the time of flight T (assuming it lands at the same height)?
  • During the phase change from solid to liquid at constant temperature, the heat absorbed for mass m is given by Q = m L. Which expression correctly represents Q?
  • Which adjustment can improve Doppler imaging?
  • What does 'resolution' in imaging refer to?
  • What term describes the ability to see motion in an image?
  • For a mass m attached to a horizontal spring with spring constant k undergoing simple harmonic motion, how is the angular frequency ω related to m and k?
  • What is the Nyquist limit in Doppler ultrasound?
  • A projectile is launched from ground level with speed v0 at angle θ above the horizontal, neglecting air resistance. Which expression gives its horizontal range R in terms of v0, θ, and g?
  • The mass defect in nuclear binding energy implies what about the mass of a bound nucleus?
  • Propagation of measurement uncertainties requires combining independent contributions in quadrature. If Q = f(x, y) with uncertainties Δx, Δy, how is ΔQ approximately found?
  • What does PRF stand for in the context of ultrasound physics?
  • What does the frame rate refer to in imaging?
  • What effect does a large tissue impedance difference have in ultrasound?
  • What effect does adjusting the gain have on an ultrasound image?
  • Sound intensity level β in decibels is defined as β = 10 log10(I/I0). What is I0?
  • Which of the following is NOT a characteristic of temporal resolution?
  • Which of the following is not a factor in assessing ultrasound risk?
  • What does color variance indicate in ultrasound imaging?
  • In the heating formula Q = m c ΔT, what does c represent?
  • In a double-slit setup with slit separation d and distance to the screen L, the fringe spacing Δy between adjacent bright fringes is given by which expression?
  • Ohm's law for a resistor is V = IR. What is the total resistance of two identical resistors in parallel?
  • Which factor leads to better detail in imaging?
  • In the Hall effect, applying a magnetic field perpendicular to the current in a conductor produces what measurable quantity?
  • What generally allows for better resolution in an image?
  • What is the main concern associated with high thermal index values in ultrasound?
  • In a thin lens with object distance do and image distance di, the thin-lens equation and the transverse magnification are respectively given by which expressions?
  • What effect does higher frequency have on attenuation?
  • How does reflection occur in ultrasound imaging?
  • What does spectral broadening indicate in an ultrasound examination?
  • What occurs when the velocity exceeds the Nyquist limit?
  • In a diffraction grating, what does m represent in the equation d sin θ = m λ?
  • A submerged object experiences buoyant force according to Archimedes' principle. What is the magnitude of buoyant force?
  • In ultrasound therapy, what factor primarily affects tissue temperature?
  • In the relativistic energy-momentum relation E^2 = (pc)^2 + (mc^2)^2, what is E when the particle is at rest (p = 0)?
  • The angular wavelength dispersion relation in a diffraction grating is d sin θ = m λ. What does d represent?
  • How can you correct for aliasing in ultrasound?
  • What term describes how fast a sound wave vibrates?
  • Which wavelength corresponds to high frequency?
  • What would likely indicate turbulent flow in an ultrasound study?
  • Rank the following photons from highest energy per photon to lowest: gamma, visible, radio.
  • What should practitioners monitor to prevent thermal injuries during ultrasound treatment?
  • What term describes the resistance of tissue to sound?
  • What is the result of using high frequency in sound waves?
  • For hydrogen-like atoms, the ionization energy from the ground state is 13.6 eV. Which option correctly states this value?
  • Temporal resolution is enhanced by which factor?
  • Which of the following better describes the relationship between frame rate and depth?
  • What is a significant outcome of using a Doppler technique?
  • A car moves at constant speed v around a flat curve of radius r. What is its centripetal acceleration a_c, and in what direction does it point?
  • What happens when sound encounters a boundary between two tissues?
  • What is the primary purpose of TGC in ultrasound imaging?
  • In the photoelectric effect, if hf equals the work function φ, what is the maximum kinetic energy of emitted electrons?
  • In ultrasound imaging, axial resolution primarily improves with which conditions?
  • Which type of wavelength corresponds to low frequency?
  • Using E_n = -13.6 eV / n^2, what is the energy of the n = 2 level for a hydrogen-like atom?
  • The magnetic force on a moving charge is F_B = q v × B. What is the magnitude when v is perpendicular to B?
  • Which equation expresses Ohm's law for a resistor?
  • Which unit is associated with capacitance?
  • What does a high Mechanical Index indicate in ultrasound therapy?
  • Which equation correctly relates wave speed v, frequency f, and wavelength λ?
  • Where is the best lateral resolution typically found?
  • What is the primary cause of refraction in ultrasound?
  • What method can be used to fix the issue of dark far field in an ultrasound image?
  • In a refracting telescope, the angular magnification is greater than 1 when which condition holds?
  • Why is it important to use the lowest output possible in ultrasound applications?
  • If the temperature of a blackbody doubles, by what factor does its radiated power increase?
  • What is a common impact of deeper structures in ultrasound imaging?
  • What principle is applied to minimize radiation exposure in medical imaging?
  • Which of the following is true about imaging depth and frame rate?
  • Which Doppler effect displays different colors to indicate direction of blood flow?
  • What describes multiple equally spaced echoes in ultrasound imaging?
  • For hydrogen-like atoms, how does the energy E_n change as the principal quantum number n increases?
  • What is the potential effect of cavitation during ultrasound therapy?
  • In a double-slit arrangement, if you double the slit separation d while keeping wavelength and distance to the screen fixed, what happens to the fringe spacing Δy?
  • What is the consequence of a long wavelength in sound waves?
  • The equation PV = constant describes which thermodynamic process?
  • What type of artifact results from false echoes created by off-axis sound in ultrasound?
  • Which principle emphasizes the concept of minimizing exposure to ultrasound pressure?
  • Lateral resolution is primarily dependent on what factor?
  • What happens when Doppler signals are acquired at incorrect angles?
  • Gauss's law relates the electric flux through a closed surface to the enclosed charge. State the law.
  • What happens to the frame rate as depth decreases?
  • When light enters a medium with a higher refractive index from air, what happens to the light ray?
  • The transverse magnification from a lens is m = - di/do. What does the negative sign indicate about the image?
  • In the relation C = κ C0, what does C0 denote?
  • Sound intensity level β is measured in decibels. Which unit is used for β?
  • What happens to the quality of an ultrasound image as attenuation increases?
  • Which of the following is a recommended practice based on ultrasound safety standards?
  • In an isolated system, which process yields zero entropy change?
  • Kirchhoff's current law states that the sum of currents entering a node equals the sum of currents leaving. True or false?
  • What is the term for an artifact caused by increased color gain in ultrasound?
  • In special relativity, time dilation is described by Δt' = γ Δt with γ = 1/√(1 - v^2/c^2). If a clock moves at speed v, what happens to the observed time interval Δt' compared with the proper time Δt?
  • According to the rule for choosing frequency in imaging, what is the relationship between detail and frequency?
  • What is the term for the ability to separate objects in an up-and-down manner?
  • In a one-dimensional elastic collision between two masses m1 and m2, which quantities are conserved?
  • What term describes the potential risk associated with the formation of bubbles in fluid due to ultrasound?
  • A block of mass m rests on a frictionless incline of angle θ to the horizontal. What is its acceleration down the incline?
  • What characteristic does pulse wave (PW) Doppler exhibit?
  • Which type of resolution pertains to the ability to separate objects side to side?
  • For an isothermal process of an ideal gas, what is the relation between pressure and volume?
  • If the density doubles while the bulk modulus remains the same, how does the speed of sound change?
  • In a solid, the speed of sound is v = sqrt(K/ρ). What do K and ρ represent?
  • In Coulomb's law F = k q1 q2 / r^2, what is k in vacuum?
  • Which artifact produces misleading information due to reflections from surrounding structures?
  • Which artifact is caused by strong reflectors in an ultrasound image?
  • Which factor is critical in obtaining accurate Doppler frequency measurements?
  • What does the Doppler effect describe?
  • What is the result of having a Doppler angle of 90 degrees?
  • In wave optics, Huygens principle explains what about diffraction?
  • How does time gain compensation help in imaging?
  • How does sound behave when it encounters a soft tissue interface?
  • The work-energy theorem relates work to kinetic energy. If a particle changes speed from v0 to v, what is the net work done on the particle?
  • What effect does bone have on sound waves in ultrasound?
  • What happens to PRF as depth decreases in ultrasound imaging?
  • Which type of resolution is most affected by beam width?
  • If a long straight wire's magnetic field distance is doubled, what happens to B?
  • A spacecraft escapes Earth's gravity from the surface. What is the escape speed in terms of G, M_E, and R_E?
  • What happens to the frame rate as imaging depth increases?
  • What is the constant speed of sound in soft tissue?
  • What does TGC stand for in ultrasound imaging?
  • Why do deep structures appear dark on an ultrasound image?
  • What can result from continuous wave (CW) Doppler?
  • What term describes the size of the sound wave?
  • Which type of artifact is typically associated with weak attenuation, leading to an increase in signal?
  • Axial resolution is determined by which of the following?
  • Which frequency results in poorer detail but deeper penetration?
  • Why is it crucial to adjust gain in ultrasound imaging?
  • According to the second law, what can be said about the entropy change in an isolated system?
  • What term describes the loss of sound energy as it travels through a medium?
  • What aspect of sound waves is primarily affected by higher frequencies?
  • A mass attached to a simple horizontal spring undergoes SHM. What is its period T in terms of mass m and spring constant k?
  • For the photoelectric effect, emission occurs only if the photon energy hf is at least the work function φ. Which statement expresses this condition?
  • What conditions lead to improved axial resolution?
  • In incompressible fluid flow, what quantity is conserved along a streamline?
  • In Compton scattering, the change in wavelength is Δλ = (h / (m_e c)) (1 - cos θ). What is the physical significance of Δλ?
  • What term refers to the repetition rate of transmitted pulse in ultrasound?
  • What should be used to limit the output in ultrasound procedures?
  • In simple harmonic motion of a mass on a horizontal spring, when the mass passes through the turning points, what is its speed?
  • The potential difference ΔV between two points is related to the electric field via ΔV = -∫ E · dl. What sign does this give for work done by the field?
  • What is the result of blood reflecting sound waves in ultrasound imaging?
  • Which of the following is the main cause of attenuation in ultrasound imaging?
  • In Faraday's law of induction, the negative sign in ε = - dΦB/dt indicates what?
  • What phenomenon enhances contrast resolution in ultrasound imaging?
  • What does a high acoustic impedance difference between two tissues typically indicate?
  • The magnetic field around a long straight wire with current I is B = μ0 I /(2π r). How does B change with distance r from the wire?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy